Series "SL" Safety-Lock Brake



    For use where loads must be positioned accuratley and held securely but permit immediate manual release

    function:

    The SAFETY-LOCK BRAKE has many applications where loads must be positioned accurately and held securely. It is used for holding loads which are raised and lowered vertically, and in applications where horizontal traversing stability is desired.

    SAFETY-LOCK permits use of efficient power train design and eliminates the loss of power associated with expensive worm gears used for load holding.

    dimensions:

    Torque
    Capacity    		 Bore
    A    		 Diam.
    B    		 C D
    (Norm.)    		 E (Max.)
    F    		 (Norm.)
    G    		 H
    150 .500/.502 1 1/2 7/16 .498/.496 2.630/2.610 .276 1 3/16 Diam.
    Hole for
    Groove Pin
    600 .750/.752 2 3/8 5/8 .746/.748 4.000/3.980 .388 1 17/32 1/4 Diam.
    Hole for
    Groove Pin


    J
    (Min.)    		 K L M N O P
    (+/- .025)    		 R Diam.
    S
    1.321 4 holes #7 (.201 Diam.)
    on a
    2" +/- .005 B.C.    		 2 1/2 1/8 1/8 Diam.
    Hole for
    Groove Pin    		 3/4 3.874 1/8 x 1/2
    Woodruff Key Seat    		 .7510/.7495
    2.173 4 holes (.280 Diam.)
    on a
    3 1/4" +/- .005 B.C.    		 3 3/4 1/8 3/16 Diam.
    Hole for
    Groove Pin    		 1 5/16 5.856 3/16 x 3/4
    Woodruff Key Seat    		 1.880/1.865


    engineering data:

    Torque
    Capacity    		 MODEL NUMBERS
    (For Ordering)    		 Max Torque
    Driven from
    Input (lbs. in.)    		 Max Torque
    Hold on Output
    (lbs. in.)    		 Max Input
    Drag
    (lbs. in)    		 Max Continuous
    RPM
    (Load Opposed)    		 Max
    Input
    Free Play    		 Max Output
    Free Play    		 Weight (lbs.)
    Flange at
    Input End    		 Flange at
    Output End
    150 SL-I-150 SL-O-150 150 150 8 800 25o 1o 1 1/3
    600 SL-I-600 SL-O-600 600 600 21 500 25o 1o 4 1/2

    How To Order:

    Sizes: Flange Location:
    150 I- Flange at input end
    600 O- Flange at output end